[Zine Librarians] makerspaces in academic libraries

SJ
Setele, Julie A
Fri, Apr 3, 2026 1:25 PM

Hi all,

I've been approached by a student group that makes and studies games (their current game project is called "Liminal Library"!). They are hoping for space in the library (always a challenge), specifically a makerspace. We already have a 3d-printing-oriented makerspace on campus (unaffiliated with the library). I'm curious if any of you have makerspaces that are maybe less 3d-printing-oriented, and could tell me about them? What kinds of tools/materials/equipment do you have in your space? Is it open for anyone to come in or is there restricted access? Is it staffed? Any tips on getting this approved are welcome, too.

Selfishly, I'm thinking this could be a great place to keep all my zine-making and collage-making materials.

Thanks,
Julie

--
Julie Setele, PhD, MLIS
User Experience and Outreach Librarian
SUNY Buffalo State University
716-878-6236
seteleja@buffalostate.edu

Pronouns: they/them/theirs
https://www.mypronouns.org/they-them


ZineLibrarians mailing list
ZineLibrarians@lists.zinelibraries.info
http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info

Hi all, I've been approached by a student group that makes and studies games (their current game project is called "Liminal Library"!). They are hoping for space in the library (always a challenge), specifically a makerspace. We already have a 3d-printing-oriented makerspace on campus (unaffiliated with the library). I'm curious if any of you have makerspaces that are maybe less 3d-printing-oriented, and could tell me about them? What kinds of tools/materials/equipment do you have in your space? Is it open for anyone to come in or is there restricted access? Is it staffed? Any tips on getting this approved are welcome, too. Selfishly, I'm thinking this could be a great place to keep all my zine-making and collage-making materials. Thanks, Julie -- Julie Setele, PhD, MLIS User Experience and Outreach Librarian SUNY Buffalo State University 716-878-6236 seteleja@buffalostate.edu Pronouns: they/them/theirs https://www.mypronouns.org/they-them _______________________________________________ ZineLibrarians mailing list ZineLibrarians@lists.zinelibraries.info http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info
JF
Jenna Freedman
Fri, Apr 3, 2026 3:12 PM

I've long wanted a Risograph and other printmaking resources. I think a
challenge is that a printmaking studio would need to be contained (for
noise) and staffed. I was bummed when our makerspace was created without
any thought for supporting zine making. ¯_(ツ)_/¯

But maybe, if you could tolerate it as your office you could be the primary
person who staffs the space???

On Fri, Apr 3, 2026 at 9:31 AM Setele, Julie A seteleja@buffalostate.edu
wrote:

Hi all,

I've been approached by a student group that makes and studies games
(their current game project is called "Liminal Library"!). They are hoping
for space in the library (always a challenge), specifically a makerspace.
We already have a 3d-printing-oriented makerspace on campus (unaffiliated
with the library). I'm curious if any of you have makerspaces that are
maybe less 3d-printing-oriented, and could tell me about them? What kinds
of tools/materials/equipment do you have in your space? Is it open for
anyone to come in or is there restricted access? Is it staffed? Any tips on
getting this approved are welcome, too.

Selfishly, I'm thinking this could be a great place to keep all my
zine-making and collage-making materials.

Thanks,
Julie

--
Julie Setele, PhD, MLIS
User Experience and Outreach Librarian
SUNY Buffalo State University
716-878-6236
seteleja@buffalostate.edu

Pronouns: they/them/theirs
https://www.mypronouns.org/they-them


ZineLibrarians mailing list
ZineLibrarians@lists.zinelibraries.info

http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info

I've long wanted a Risograph and other printmaking resources. I think a challenge is that a printmaking studio would need to be contained (for noise) and staffed. I was bummed when our makerspace was created without any thought for supporting zine making. ¯\_(ツ)_/¯ But maybe, if you could tolerate it as your office you could be the primary person who staffs the space??? On Fri, Apr 3, 2026 at 9:31 AM Setele, Julie A <seteleja@buffalostate.edu> wrote: > Hi all, > > I've been approached by a student group that makes and studies games > (their current game project is called "Liminal Library"!). They are hoping > for space in the library (always a challenge), specifically a makerspace. > We already have a 3d-printing-oriented makerspace on campus (unaffiliated > with the library). I'm curious if any of you have makerspaces that are > maybe less 3d-printing-oriented, and could tell me about them? What kinds > of tools/materials/equipment do you have in your space? Is it open for > anyone to come in or is there restricted access? Is it staffed? Any tips on > getting this approved are welcome, too. > > Selfishly, I'm thinking this could be a great place to keep all my > zine-making and collage-making materials. > > Thanks, > Julie > > -- > Julie Setele, PhD, MLIS > User Experience and Outreach Librarian > SUNY Buffalo State University > 716-878-6236 > seteleja@buffalostate.edu > > Pronouns: they/them/theirs > https://www.mypronouns.org/they-them > _______________________________________________ > ZineLibrarians mailing list > ZineLibrarians@lists.zinelibraries.info > > http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info > -- Jenna Freedman | she, her Director of the Barnard Zine Library make an appointment <https://barnard.libcal.com/appointments/jenna-freedman> | https://is.gd/jennacalendar https://linktr.ee/barnardzinelibrary _______________________________________________ ZineLibrarians mailing list ZineLibrarians@lists.zinelibraries.info http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info
SD
Spencer D. C. Keralis
Fri, Apr 3, 2026 6:35 PM

Hi, Julie:
At UMKC, ZineLab is part of the Digital Collaboration Studio
https://library.umkc.edu/digital-collaboration-studio/, which I oversee.
We have a lot of analog equipment - bone folders, awls, etc., that students
can check out to use in our space. We also have a variety of
digitization equipment in our Retro Media Lab to generate collage
materials, and design software on our lab computers. We soft launched this
semester and we're working on getting funding for a printer which students
will be able to use with their print allowance. The Studio was an existing
lab space, and the ZineLab emerged organically from demand, primarily from
faculty. I'm teaching a pamphlet stitch workshop
https://libcal.library.umkc.edu/event/15864242?hs=a here in a few minutes!
Best,
Spencer

On Fri, Apr 3, 2026 at 10:19 AM Jenna Freedman jfreedma@barnard.edu wrote:

I've long wanted a Risograph and other printmaking resources. I think a
challenge is that a printmaking studio would need to be contained (for
noise) and staffed. I was bummed when our makerspace was created without
any thought for supporting zine making. ¯_(ツ)_/¯

But maybe, if you could tolerate it as your office you could be the
primary person who staffs the space???

On Fri, Apr 3, 2026 at 9:31 AM Setele, Julie A seteleja@buffalostate.edu
wrote:

Hi all,

I've been approached by a student group that makes and studies games
(their current game project is called "Liminal Library"!). They are hoping
for space in the library (always a challenge), specifically a makerspace.
We already have a 3d-printing-oriented makerspace on campus (unaffiliated
with the library). I'm curious if any of you have makerspaces that are
maybe less 3d-printing-oriented, and could tell me about them? What kinds
of tools/materials/equipment do you have in your space? Is it open for
anyone to come in or is there restricted access? Is it staffed? Any tips on
getting this approved are welcome, too.

Selfishly, I'm thinking this could be a great place to keep all my
zine-making and collage-making materials.

Thanks,
Julie

--
Julie Setele, PhD, MLIS
User Experience and Outreach Librarian
SUNY Buffalo State University
716-878-6236
seteleja@buffalostate.edu

Pronouns: they/them/theirs
https://www.mypronouns.org/they-them


ZineLibrarians mailing list
ZineLibrarians@lists.zinelibraries.info

http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info

Hi, Julie: At UMKC, ZineLab is part of the Digital Collaboration Studio <https://library.umkc.edu/digital-collaboration-studio/>, which I oversee. We have a lot of analog equipment - bone folders, awls, etc., that students can check out to use in our space. We also have a variety of digitization equipment in our Retro Media Lab to generate collage materials, and design software on our lab computers. We soft launched this semester and we're working on getting funding for a printer which students will be able to use with their print allowance. The Studio was an existing lab space, and the ZineLab emerged organically from demand, primarily from faculty. I'm teaching a pamphlet stitch workshop <https://libcal.library.umkc.edu/event/15864242?hs=a> here in a few minutes! Best, Spencer On Fri, Apr 3, 2026 at 10:19 AM Jenna Freedman <jfreedma@barnard.edu> wrote: > I've long wanted a Risograph and other printmaking resources. I think a > challenge is that a printmaking studio would need to be contained (for > noise) and staffed. I was bummed when our makerspace was created without > any thought for supporting zine making. ¯\_(ツ)_/¯ > > But maybe, if you could tolerate it as your office you could be the > primary person who staffs the space??? > > > On Fri, Apr 3, 2026 at 9:31 AM Setele, Julie A <seteleja@buffalostate.edu> > wrote: > >> Hi all, >> >> I've been approached by a student group that makes and studies games >> (their current game project is called "Liminal Library"!). They are hoping >> for space in the library (always a challenge), specifically a makerspace. >> We already have a 3d-printing-oriented makerspace on campus (unaffiliated >> with the library). I'm curious if any of you have makerspaces that are >> maybe less 3d-printing-oriented, and could tell me about them? What kinds >> of tools/materials/equipment do you have in your space? Is it open for >> anyone to come in or is there restricted access? Is it staffed? Any tips on >> getting this approved are welcome, too. >> >> Selfishly, I'm thinking this could be a great place to keep all my >> zine-making and collage-making materials. >> >> Thanks, >> Julie >> >> -- >> Julie Setele, PhD, MLIS >> User Experience and Outreach Librarian >> SUNY Buffalo State University >> 716-878-6236 >> seteleja@buffalostate.edu >> >> Pronouns: they/them/theirs >> https://www.mypronouns.org/they-them >> _______________________________________________ >> ZineLibrarians mailing list >> ZineLibrarians@lists.zinelibraries.info >> >> http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info >> > > > -- > Jenna Freedman | she, her > Director of the Barnard Zine Library > make an appointment > <https://barnard.libcal.com/appointments/jenna-freedman> | > https://is.gd/jennacalendar > https://linktr.ee/barnardzinelibrary > > _______________________________________________ > ZineLibrarians mailing list > ZineLibrarians@lists.zinelibraries.info > > http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info > _______________________________________________ ZineLibrarians mailing list ZineLibrarians@lists.zinelibraries.info http://lists.zinelibraries.info/listinfo.cgi/zinelibrarians-zinelibraries.info